Frequently Asked Questions

The Wall Zen solution uses an innovative vertical printing system design and manufactured in Germany to the highest quality.

It utilises an inkjet system to print on virtually any vertical surface, regardless of material and unevenness.

Because we print directly on the wall there is no need for any stencils, foils or vinyl and so no wastage.

It works quickly, cleanly and quietly.

You can print virtually any digital graphic, sketch, image, logo or text!

Most image file types can be used, AI, PSD, PDF, EPS, TIF, PNG, JPG, BMP.

Even paper artwork is perfectly printable. With a simple flatbed scanner, we have already achieved fantastic results by scanning at the highest resolution. Processing and printing old originals, maps, drawings, postcards, sketches, photos or paintings work perfectly and the results are absolutely impressive. So it's just a few clicks from any paper artwork to oversized artwork.

Image quality and resolution is important and determines how large you can print, 300dpi (dots or pixels per inch) works well with most images but depending on the image lower resolutions can produce perfectly good results.  We can provide advice and  design services to rescale images if necessary at a minimal additional charge.

You can absolutely use your own images for printing with Wall Zen, or you can choose from one of the many online sites offering free or paid for imagery. See the images page on our website for inspiration and image sources. 

If you choose to use your own image, we will need to review it to ensure it is suitable for printing at your desired size.

The Wall Zen solution can print on a wide range of surfaces, including painted walls, concrete, brick, wood, glass, metal and more. 

The surface should be clean and smooth for the best possible print result, but great affects can also be achieved on textured surfaces.

The wall printer also easily masters walls with holes and cracks. The built-in laser sensor system compensates for unevenness up to a difference of up to 10 cm.

Printing height: The vertical axis is extremely flexible as it can be extended in 10 cm increments. The lowest ceiling height for using the Wall Zen is 1.7 m (5 ft 6" ). After that, the axis can optionally be extended up to 4 m (13 ft) print height in 10 cm (4 in) increments.

Print width: unlimited

Due to the limitations of inkjet technology, there are margins in corners to adjacent walls, floor and ceiling. These are 6 cm (2.3″) on the left, 10 cm (3.3″) on the right, 25 cm (9.8″) on the top, and 25 cm (9.8″) on the bottom.